#include <ObjectFileJIT.h>

Inheritance diagram for lldb_private::ObjectFileJIT:

[legend]

Public Member Functions
	ObjectFileJIT (const lldb::ModuleSP &module_sp, const lldb::ObjectFileJITDelegateSP &delegate_sp)

	~ObjectFileJIT () override

bool	isA (const void *ClassID) const override

bool	ParseHeader () override
	Attempts to parse the object header.

bool	SetLoadAddress (lldb_private::Target &target, lldb::addr_t value, bool value_is_offset) override
	Sets the load address for an entire module, assuming a rigid slide of sections, if possible in the implementation.

lldb::ByteOrder	GetByteOrder () const override
	Gets whether endian swapping should occur when extracting data from this object file.

bool	IsExecutable () const override
	Tells whether this object file is capable of being the main executable for a process.

uint32_t	GetAddressByteSize () const override
	Gets the address size in bytes for the current object file.

void	ParseSymtab (lldb_private::Symtab &symtab) override
	Parse the symbol table into the provides symbol table object.

bool	IsStripped () override
	Detect if this object file has been stripped of local symbols.

void	CreateSections (lldb_private::SectionList &unified_section_list) override

void	Dump (lldb_private::Stream *s) override
	Dump a description of this object to a Stream.

lldb_private::ArchSpec	GetArchitecture () override
	Get the ArchSpec for this object file.

lldb_private::UUID	GetUUID () override
	Gets the UUID for this object file.

uint32_t	GetDependentModules (lldb_private::FileSpecList &files) override
	Extract the dependent modules from an object file.

size_t	ReadSectionData (lldb_private::Section section, lldb::offset_t section_offset, void dst, size_t dst_len) override

size_t	ReadSectionData (lldb_private::Section *section, lldb_private::DataExtractor &section_data) override

lldb_private::Address	GetEntryPointAddress () override
	Returns the address of the Entry Point in this object file - if the object file doesn't have an entry point (because it is not an executable file) then an invalid address is returned.

lldb_private::Address	GetBaseAddress () override
	Returns base address of this object file.

ObjectFile::Type	CalculateType () override
	The object file should be able to calculate its type by looking at its file header and possibly the sections or other data in the object file.

ObjectFile::Strata	CalculateStrata () override
	The object file should be able to calculate the strata of the object file.

llvm::StringRef	GetPluginName () override

Public Member Functions inherited from lldb_private::ObjectFile
	ObjectFile (const lldb::ModuleSP &module_sp, const FileSpec *file_spec_ptr, lldb::offset_t file_offset, lldb::offset_t length, lldb::DataBufferSP data_sp, lldb::offset_t data_offset)
	Construct with a parent module, offset, and header data.

	ObjectFile (const lldb::ModuleSP &module_sp, const lldb::ProcessSP &process_sp, lldb::addr_t header_addr, lldb::DataBufferSP data_sp)

	~ObjectFile () override
	Destructor.

virtual void	Dump (Stream *s)=0
	Dump a description of this object to a Stream.

virtual bool	isA (const void *ClassID) const

virtual uint32_t	GetAddressByteSize () const =0
	Gets the address size in bytes for the current object file.

virtual AddressClass	GetAddressClass (lldb::addr_t file_addr)
	Get the address type given a file address in an object file.

virtual uint32_t	GetDependentModules (FileSpecList &file_list)=0
	Extract the dependent modules from an object file.

virtual bool	IsExecutable () const =0
	Tells whether this object file is capable of being the main executable for a process.

virtual lldb::addr_t	GetFileOffset () const
	Returns the offset into a file at which this object resides.

virtual lldb::addr_t	GetByteSize () const

virtual FileSpec &	GetFileSpec ()
	Get accessor to the object file specification.

virtual const FileSpec &	GetFileSpec () const
	Get const accessor to the object file specification.

virtual ArchSpec	GetArchitecture ()=0
	Get the ArchSpec for this object file.

virtual SectionList *	GetSectionList (bool update_module_section_list=true)
	Gets the section list for the currently selected architecture (and object for archives).

virtual void	CreateSections (SectionList &unified_section_list)=0

virtual void	SectionFileAddressesChanged ()
	Notify the ObjectFile that the file addresses in the Sections for this module have been changed.

Symtab *	GetSymtab ()
	Gets the symbol table for the currently selected architecture (and object for archives).

virtual void	ParseSymtab (Symtab &symtab)=0
	Parse the symbol table into the provides symbol table object.

virtual void	RelocateSection (lldb_private::Section *section)
	Perform relocations on the section if necessary.

virtual Symbol *	ResolveSymbolForAddress (const Address &so_addr, bool verify_unique)
	Appends a Symbol for the specified so_addr to the symbol table.

virtual bool	IsStripped ()=0
	Detect if this object file has been stripped of local symbols.

virtual void	ClearSymtab ()
	Frees the symbol table.

virtual UUID	GetUUID ()=0
	Gets the UUID for this object file.

virtual lldb_private::FileSpecList	GetReExportedLibraries ()
	Gets the file spec list of libraries re-exported by this object file.

virtual bool	SetLoadAddress (Target &target, lldb::addr_t value, bool value_is_offset)
	Sets the load address for an entire module, assuming a rigid slide of sections, if possible in the implementation.

virtual lldb::ByteOrder	GetByteOrder () const =0
	Gets whether endian swapping should occur when extracting data from this object file.

virtual bool	ParseHeader ()=0
	Attempts to parse the object header.

virtual bool	AllowAssemblyEmulationUnwindPlans ()
	Returns if the function bounds for symbols in this symbol file are likely accurate.

virtual lldb_private::Address	GetImageInfoAddress (Target *target)
	Similar to Process::GetImageInfoAddress().

virtual lldb_private::Address	GetEntryPointAddress ()
	Returns the address of the Entry Point in this object file - if the object file doesn't have an entry point (because it is not an executable file) then an invalid address is returned.

virtual lldb_private::Address	GetBaseAddress ()
	Returns base address of this object file.

virtual uint32_t	GetNumThreadContexts ()

virtual std::string	GetIdentifierString ()
	Some object files may have an identifier string embedded in them, e.g.

virtual lldb_private::AddressableBits	GetAddressableBits ()
	Some object files may have the number of bits used for addressing embedded in them, e.g.

virtual bool	GetCorefileMainBinaryInfo (lldb::addr_t &value, bool &value_is_offset, UUID &uuid, ObjectFile::BinaryType &type)
	When the ObjectFile is a core file, lldb needs to locate the "binary" in the core file.

virtual bool	GetCorefileThreadExtraInfos (std::vector< lldb::tid_t > &tids)
	Get metadata about threads from the corefile.

virtual lldb::RegisterContextSP	GetThreadContextAtIndex (uint32_t idx, lldb_private::Thread &thread)

virtual Type	CalculateType ()=0
	The object file should be able to calculate its type by looking at its file header and possibly the sections or other data in the object file.

virtual void	SetType (Type type)
	In cases where the type can't be calculated (elf files), this routine allows someone to explicitly set it.

virtual Strata	CalculateStrata ()=0
	The object file should be able to calculate the strata of the object file.

virtual llvm::VersionTuple	GetVersion ()
	Get the object file version numbers.

virtual llvm::VersionTuple	GetMinimumOSVersion ()
	Get the minimum OS version this object file can run on.

virtual llvm::VersionTuple	GetSDKVersion ()
	Get the SDK OS version this object file was built with.

virtual bool	GetIsDynamicLinkEditor ()
	Return true if this file is a dynamic link editor (dyld)

Type	GetType ()

Strata	GetStrata ()

size_t	GetData (lldb::offset_t offset, size_t length, DataExtractor &data) const

size_t	CopyData (lldb::offset_t offset, size_t length, void *dst) const

virtual size_t	ReadSectionData (Section section, lldb::offset_t section_offset, void dst, size_t dst_len)

virtual size_t	ReadSectionData (Section *section, DataExtractor &section_data)

virtual size_t	GetSectionDataSize (Section *section)

bool	IsInMemory () const
	Returns true if the object file exists only in memory.

virtual llvm::StringRef	StripLinkerSymbolAnnotations (llvm::StringRef symbol_name) const

virtual bool	CanTrustAddressRanges ()
	Can we trust the address ranges accelerator associated with this object file to be complete.

virtual std::vector< LoadableData >	GetLoadableData (Target &target)
	Loads this objfile to memory.

virtual std::unique_ptr< CallFrameInfo >	CreateCallFrameInfo ()
	Creates a plugin-specific call frame info.

virtual bool	LoadCoreFileImages (lldb_private::Process &process)
	Load binaries listed in a corefile.

uint32_t	GetCacheHash ()
	Get a hash that can be used for caching object file releated information.

Public Member Functions inherited from lldb_private::PluginInterface
	PluginInterface ()=default

virtual	~PluginInterface ()=default

virtual llvm::StringRef	GetPluginName ()=0

	PluginInterface (const PluginInterface &)=delete

PluginInterface &	operator= (const PluginInterface &)=delete

Public Member Functions inherited from lldb_private::ModuleChild
	ModuleChild (const lldb::ModuleSP &module_sp)
	Construct with owning module.

	~ModuleChild ()
	Destructor.

const ModuleChild &	operator= (const ModuleChild &rhs)
	Assignment operator.

lldb::ModuleSP	GetModule () const
	Get const accessor for the module pointer.

void	SetModule (const lldb::ModuleSP &module_sp)
	Set accessor for the module pointer.

Static Public Member Functions
static void	Initialize ()

static void	Terminate ()

static llvm::StringRef	GetPluginNameStatic ()

static llvm::StringRef	GetPluginDescriptionStatic ()

static lldb_private::ObjectFile *	CreateInstance (const lldb::ModuleSP &module_sp, lldb::DataBufferSP data_sp, lldb::offset_t data_offset, const lldb_private::FileSpec *file, lldb::offset_t file_offset, lldb::offset_t length)

static lldb_private::ObjectFile *	CreateMemoryInstance (const lldb::ModuleSP &module_sp, lldb::WritableDataBufferSP data_sp, const lldb::ProcessSP &process_sp, lldb::addr_t header_addr)

static size_t	GetModuleSpecifications (const lldb_private::FileSpec &file, lldb::DataBufferSP &data_sp, lldb::offset_t data_offset, lldb::offset_t file_offset, lldb::offset_t length, lldb_private::ModuleSpecList &specs)

static bool	classof (const ObjectFile *obj)

Static Public Member Functions inherited from lldb_private::ObjectFile
static lldb::ObjectFileSP	FindPlugin (const lldb::ModuleSP &module_sp, const FileSpec *file_spec, lldb::offset_t file_offset, lldb::offset_t file_size, lldb::DataBufferSP &data_sp, lldb::offset_t &data_offset)
	Find a ObjectFile plug-in that can parse file_spec.

static lldb::ObjectFileSP	FindPlugin (const lldb::ModuleSP &module_sp, const lldb::ProcessSP &process_sp, lldb::addr_t header_addr, lldb::WritableDataBufferSP file_data_sp)
	Find a ObjectFile plug-in that can parse a file in memory.

static size_t	GetModuleSpecifications (const FileSpec &file, lldb::offset_t file_offset, lldb::offset_t file_size, ModuleSpecList &specs, lldb::DataBufferSP data_sp=lldb::DataBufferSP())

static size_t	GetModuleSpecifications (const lldb_private::FileSpec &file, lldb::DataBufferSP &data_sp, lldb::offset_t data_offset, lldb::offset_t file_offset, lldb::offset_t file_size, lldb_private::ModuleSpecList &specs)

static bool	IsObjectFile (lldb_private::FileSpec file_spec)

static bool	SplitArchivePathWithObject (llvm::StringRef path_with_object, lldb_private::FileSpec &archive_file, lldb_private::ConstString &archive_object, bool must_exist)
	Split a path into a file path with object name.

static lldb::WritableDataBufferSP	ReadMemory (const lldb::ProcessSP &process_sp, lldb::addr_t addr, size_t byte_size)

static lldb::SymbolType	GetSymbolTypeFromName (llvm::StringRef name, lldb::SymbolType symbol_type_hint=lldb::eSymbolTypeUndefined)

static lldb::DataBufferSP	MapFileData (const FileSpec &file, uint64_t Size, uint64_t Offset)

Static Public Attributes
static char	ID

Static Public Attributes inherited from lldb_private::ObjectFile
static char	ID

Protected Attributes
lldb::ObjectFileJITDelegateWP	m_delegate_wp

Protected Attributes inherited from lldb_private::ObjectFile
FileSpec	m_file

Type	m_type

Strata	m_strata

lldb::addr_t	m_file_offset
	The offset in bytes into the file, or the address in memory.

lldb::addr_t	m_length
	The length of this object file if it is known (can be zero if length is unknown or can't be determined).

DataExtractor	m_data
	The data for this object file so things can be parsed lazily.

lldb::ProcessWP	m_process_wp

const lldb::addr_t	m_memory_addr
	Set if the object file only exists in memory.

std::unique_ptr< lldb_private::SectionList >	m_sections_up

std::unique_ptr< lldb_private::Symtab >	m_symtab_up

std::unique_ptr< llvm::once_flag >	m_symtab_once_up
	We need a llvm::once_flag that we can use to avoid locking the module lock and deadlocking LLDB.

std::optional< uint32_t >	m_cache_hash

Protected Attributes inherited from lldb_private::ModuleChild
lldb::ModuleWP	m_module_wp
	The Module that owns the object that inherits from this class.

Additional Inherited Members
Public Types inherited from lldb_private::ObjectFile
enum	Type { eTypeInvalid = 0 , eTypeCoreFile , eTypeExecutable , eTypeDebugInfo , eTypeDynamicLinker , eTypeObjectFile , eTypeSharedLibrary , eTypeStubLibrary , eTypeJIT , eTypeUnknown }

enum	Strata { eStrataInvalid = 0 , eStrataUnknown , eStrataUser , eStrataKernel , eStrataRawImage , eStrataJIT }

enum	BinaryType { eBinaryTypeInvalid = 0 , eBinaryTypeUnknown , eBinaryTypeKernel , eBinaryTypeUser , eBinaryTypeStandalone }
	If we have a corefile binary hint, this enum specifies the binary type which we can use to select the correct DynamicLoader plugin. More...

Protected Member Functions inherited from lldb_private::ObjectFile
bool	SetModulesArchitecture (const ArchSpec &new_arch)
	Sets the architecture for a module.

Static Protected Attributes inherited from lldb_private::ObjectFile
static size_t	g_initial_bytes_to_read = 512
	The number of bytes to read when going through the plugins.

Detailed Description

Definition at line 33 of file ObjectFileJIT.h.

Constructor & Destructor Documentation

◆ ObjectFileJIT()

ObjectFileJIT::ObjectFileJIT	(	const lldb::ModuleSP &	module_sp,
		const lldb::ObjectFileJITDelegateSP &	delegate_sp
	)

Definition at line 71 of file ObjectFileJIT.cpp.

References lldb_private::ObjectFile::m_data, m_delegate_wp, lldb_private::DataExtractor::SetAddressByteSize(), and lldb_private::DataExtractor::SetByteOrder().

◆ ~ObjectFileJIT()

ObjectFileJIT::~ObjectFileJIT ( )

overridedefault

Member Function Documentation

◆ CalculateStrata()

ObjectFile::Strata ObjectFileJIT::CalculateStrata ( )

overridevirtual

The object file should be able to calculate the strata of the object file.

Many object files for platforms might be for either user space debugging or for kernel debugging. If your object file subclass can figure this out, it will help with debugger plug-in selection when it comes time to debug.

Returns: The calculated object file strata for the current object file.

Implements lldb_private::ObjectFile.

Definition at line 160 of file ObjectFileJIT.cpp.

References lldb_private::ObjectFile::eStrataJIT.

◆ CalculateType()

ObjectFile::Type ObjectFileJIT::CalculateType ( )

overridevirtual

The object file should be able to calculate its type by looking at its file header and possibly the sections or other data in the object file.

The file type is used in the debugger to help select the correct plug- ins for the job at hand, so this is important to get right. If any eTypeXXX definitions do not match up with the type of file you are loading, please feel free to add a new enumeration value.

Returns: The calculated file type for the current object file.

Implements lldb_private::ObjectFile.

Definition at line 158 of file ObjectFileJIT.cpp.

References lldb_private::ObjectFile::eTypeJIT.

◆ classof()

static bool lldb_private::ObjectFileJIT::classof ( const ObjectFile * obj )

inlinestatic

Definition at line 72 of file ObjectFileJIT.h.

References ID, and lldb_private::ObjectFile::isA().

◆ CreateInstance()

ObjectFile * ObjectFileJIT::CreateInstance	(	const lldb::ModuleSP &	module_sp,
		lldb::DataBufferSP	data_sp,
		lldb::offset_t	data_offset,
		const lldb_private::FileSpec *	file,
		lldb::offset_t	file_offset,
		lldb::offset_t	length
	)

static

Definition at line 43 of file ObjectFileJIT.cpp.

Referenced by Initialize(), and Terminate().

◆ CreateMemoryInstance()

ObjectFile * ObjectFileJIT::CreateMemoryInstance	(	const lldb::ModuleSP &	module_sp,
		lldb::WritableDataBufferSP	data_sp,
		const lldb::ProcessSP &	process_sp,
		lldb::addr_t	header_addr
	)

static

Definition at line 54 of file ObjectFileJIT.cpp.

Referenced by Initialize().

◆ CreateSections()

void ObjectFileJIT::CreateSections ( lldb_private::SectionList & unified_section_list )

overridevirtual

Implements lldb_private::ObjectFile.

Definition at line 106 of file ObjectFileJIT.cpp.

References m_delegate_wp, and lldb_private::ObjectFile::m_sections_up.

◆ Dump()

void ObjectFileJIT::Dump ( lldb_private::Stream * s )

overridevirtual

Dump a description of this object to a Stream.

Dump a description of the current contents of this object to the supplied stream s. The dumping should include the section list if it has been parsed, and the symbol table if it has been parsed.

Parameters

[in] s The stream to which to dump the object description.

Implements lldb_private::ObjectFile.

Definition at line 117 of file ObjectFileJIT.cpp.

References lldb_private::Stream::AsRawOstream(), lldb_private::SectionList::Dump(), lldb_private::Stream::EOL(), lldb_private::eSortOrderNone, GetArchitecture(), lldb_private::Stream::GetIndentLevel(), lldb_private::ModuleChild::GetModule(), lldb_private::ObjectFile::GetSectionList(), lldb_private::Stream::Indent(), lldb_private::ObjectFile::m_symtab_up, lldb_private::Stream::Printf(), lldb_private::Stream::PutCString(), and UINT32_MAX.

◆ GetAddressByteSize()

uint32_t ObjectFileJIT::GetAddressByteSize ( ) const

overridevirtual

Gets the address size in bytes for the current object file.

Returns: The size of an address in bytes for the currently selected architecture (and object for archives). Returns zero if no architecture or object has been selected.

Implements lldb_private::ObjectFile.

Definition at line 92 of file ObjectFileJIT.cpp.

References lldb_private::DataExtractor::GetAddressByteSize(), and lldb_private::ObjectFile::m_data.

Referenced by ReadSectionData().

◆ GetArchitecture()

ArchSpec ObjectFileJIT::GetArchitecture ( )

overridevirtual

Get the ArchSpec for this object file.

Returns: The ArchSpec of this object file. In case of error, an invalid ArchSpec object is returned.

Implements lldb_private::ObjectFile.

Definition at line 162 of file ObjectFileJIT.cpp.

References m_delegate_wp.

Referenced by Dump().

◆ GetBaseAddress()

lldb_private::Address ObjectFileJIT::GetBaseAddress ( )

overridevirtual

Returns base address of this object file.

This also sometimes referred to as the "preferred load address" or the "image base address". Addresses within object files are often expressed relative to this base. If this address corresponds to a specific section (usually the first byte of the first section) then the returned address will have this section set. Otherwise, the address will just have the offset member filled in, indicating that this represents a file address.

Reimplemented from lldb_private::ObjectFile.

Definition at line 156 of file ObjectFileJIT.cpp.

◆ GetByteOrder()

ByteOrder ObjectFileJIT::GetByteOrder ( ) const

overridevirtual

Gets whether endian swapping should occur when extracting data from this object file.

Returns: Returns true if endian swapping is needed, false otherwise.

Implements lldb_private::ObjectFile.

Definition at line 88 of file ObjectFileJIT.cpp.

References lldb_private::DataExtractor::GetByteOrder(), and lldb_private::ObjectFile::m_data.

Referenced by ReadSectionData().

◆ GetDependentModules()

uint32_t ObjectFileJIT::GetDependentModules ( lldb_private::FileSpecList & file_list )

overridevirtual

Extract the dependent modules from an object file.

If an object file has information about which other images it depends on (such as shared libraries), this function will provide the list. Since many executables or shared libraries may depend on the same files, FileSpecList::AppendIfUnique(const FileSpec &) should be used to make sure any files that are added are not already in the list.

Parameters

[out] file_list A list of file specification objects that gets dependent files appended to.

Returns: The number of new files that were appended to file_list.

See also: FileSpecList::AppendIfUnique(const FileSpec &)

Implements lldb_private::ObjectFile.

Definition at line 145 of file ObjectFileJIT.cpp.

References lldb_private::FileSpecList::Clear().

◆ GetEntryPointAddress()

lldb_private::Address ObjectFileJIT::GetEntryPointAddress ( )

overridevirtual

Returns the address of the Entry Point in this object file - if the object file doesn't have an entry point (because it is not an executable file) then an invalid address is returned.

Returns: Returns the entry address for this module.

Reimplemented from lldb_private::ObjectFile.

Definition at line 152 of file ObjectFileJIT.cpp.

◆ GetModuleSpecifications()

size_t ObjectFileJIT::GetModuleSpecifications	(	const lldb_private::FileSpec &	file,
		lldb::DataBufferSP &	data_sp,
		lldb::offset_t	data_offset,
		lldb::offset_t	file_offset,
		lldb::offset_t	length,
		lldb_private::ModuleSpecList &	specs
	)

static

Definition at line 63 of file ObjectFileJIT.cpp.

Referenced by Initialize().

◆ GetPluginDescriptionStatic()

static llvm::StringRef lldb_private::ObjectFileJIT::GetPluginDescriptionStatic ( )

inlinestatic

Definition at line 47 of file ObjectFileJIT.h.

Referenced by Initialize().

◆ GetPluginName()

llvm::StringRef lldb_private::ObjectFileJIT::GetPluginName ( )

inlineoverridevirtual

Implements lldb_private::PluginInterface.

Definition at line 116 of file ObjectFileJIT.h.

References GetPluginNameStatic().

◆ GetPluginNameStatic()

static llvm::StringRef lldb_private::ObjectFileJIT::GetPluginNameStatic ( )

inlinestatic

Definition at line 45 of file ObjectFileJIT.h.

Referenced by GetPluginName(), and Initialize().

◆ GetUUID()

UUID ObjectFileJIT::GetUUID ( )

overridevirtual

Gets the UUID for this object file.

If the object file format contains a UUID, the value should be returned. Else ObjectFile instances should return the MD5 checksum of all of the bytes for the object file (or memory for memory based object files).

Returns: The object file's UUID. In case of an error, an empty UUID is returned.

Implements lldb_private::ObjectFile.

Definition at line 140 of file ObjectFileJIT.cpp.

◆ Initialize()

void ObjectFileJIT::Initialize ( )

static

Definition at line 33 of file ObjectFileJIT.cpp.

References CreateInstance(), CreateMemoryInstance(), GetModuleSpecifications(), GetPluginDescriptionStatic(), GetPluginNameStatic(), and lldb_private::PluginManager::RegisterPlugin().

◆ isA()

bool lldb_private::ObjectFileJIT::isA ( const void * ClassID ) const

inlineoverridevirtual

Reimplemented from lldb_private::ObjectFile.

Definition at line 69 of file ObjectFileJIT.h.

References ID, and lldb_private::ObjectFile::isA().

◆ IsExecutable()

bool ObjectFileJIT::IsExecutable ( ) const

overridevirtual

Tells whether this object file is capable of being the main executable for a process.

Returns: true if it is, false otherwise.

Implements lldb_private::ObjectFile.

Definition at line 90 of file ObjectFileJIT.cpp.

◆ IsStripped()

bool ObjectFileJIT::IsStripped ( )

overridevirtual

Detect if this object file has been stripped of local symbols.

Returns: Return true if the object file has been stripped of local symbols.

Implements lldb_private::ObjectFile.

Definition at line 102 of file ObjectFileJIT.cpp.

◆ ParseHeader()

bool ObjectFileJIT::ParseHeader ( )

overridevirtual

Attempts to parse the object header.

This function is used as a test to see if a given plug-in instance can parse the header data already contained in ObjectFile::m_data. If an object file parser does not recognize that magic bytes in a header, false should be returned and the next plug-in can attempt to parse an object file.

Returns: Returns true if the header was parsed successfully, false otherwise.

Implements lldb_private::ObjectFile.

Definition at line 83 of file ObjectFileJIT.cpp.

◆ ParseSymtab()

void ObjectFileJIT::ParseSymtab ( lldb_private::Symtab & symtab )

overridevirtual

Parse the symbol table into the provides symbol table object.

Symbol table parsing will be done once when this function is called by each object file plugin. All of the necessary locks will already be acquired before this function is called and the symbol table object to populate is supplied as an argument and doesn't need to be created by each plug-in.

Parameters

The	symbol table to populate.

Implements lldb_private::ObjectFile.

Definition at line 96 of file ObjectFileJIT.cpp.

References m_delegate_wp.

◆ ReadSectionData() [1/2]

size_t ObjectFileJIT::ReadSectionData	(	lldb_private::Section *	section,
		lldb::offset_t	section_offset,
		void *	dst,
		size_t	dst_len
	)

overridevirtual

Reimplemented from lldb_private::ObjectFile.

Definition at line 190 of file ObjectFileJIT.cpp.

References lldb_private::Section::GetFileOffset(), and lldb_private::Section::GetFileSize().

◆ ReadSectionData() [2/2]

size_t ObjectFileJIT::ReadSectionData	(	lldb_private::Section *	section,
		lldb_private::DataExtractor &	section_data
	)

overridevirtual

Reimplemented from lldb_private::ObjectFile.

Definition at line 208 of file ObjectFileJIT.cpp.

References lldb_private::DataExtractor::Clear(), GetAddressByteSize(), GetByteOrder(), lldb_private::DataExtractor::GetByteSize(), lldb_private::Section::GetFileOffset(), lldb_private::Section::GetFileSize(), lldb_private::DataExtractor::SetAddressByteSize(), lldb_private::DataExtractor::SetByteOrder(), and lldb_private::DataExtractor::SetData().

◆ SetLoadAddress()

bool ObjectFileJIT::SetLoadAddress	(	lldb_private::Target &	target,
		lldb::addr_t	value,
		bool	value_is_offset
	)

overridevirtual

Sets the load address for an entire module, assuming a rigid slide of sections, if possible in the implementation.

Returns: Returns true iff any section's load address changed.

Reimplemented from lldb_private::ObjectFile.

Definition at line 168 of file ObjectFileJIT.cpp.

References lldb_private::SectionList::GetSectionAtIndex(), lldb_private::ObjectFile::GetSectionList(), lldb_private::Target::GetSectionLoadList(), lldb_private::SectionList::GetSize(), and lldb_private::SectionLoadList::SetSectionLoadAddress().

◆ Terminate()

void ObjectFileJIT::Terminate ( )

static

Definition at line 39 of file ObjectFileJIT.cpp.

References CreateInstance(), and lldb_private::PluginManager::UnregisterPlugin().

Member Data Documentation

◆ ID

char ObjectFileJIT::ID

static

Definition at line 68 of file ObjectFileJIT.h.

Referenced by classof(), and isA().

◆ m_delegate_wp

lldb::ObjectFileJITDelegateWP lldb_private::ObjectFileJIT::m_delegate_wp

protected

Definition at line 119 of file ObjectFileJIT.h.

Referenced by CreateSections(), GetArchitecture(), ObjectFileJIT(), and ParseSymtab().

The documentation for this class was generated from the following files:

Public Member Functions

Static Public Member Functions

Static Public Attributes

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

◆ ObjectFileJIT()

◆ ~ObjectFileJIT()

Member Function Documentation

◆ CalculateStrata()

◆ CalculateType()

◆ classof()

◆ CreateInstance()

◆ CreateMemoryInstance()

◆ CreateSections()

◆ Dump()

◆ GetAddressByteSize()

◆ GetArchitecture()

◆ GetBaseAddress()

◆ GetByteOrder()

◆ GetDependentModules()

◆ GetEntryPointAddress()

◆ GetModuleSpecifications()

◆ GetPluginDescriptionStatic()

◆ GetPluginName()

◆ GetPluginNameStatic()

◆ GetUUID()

◆ Initialize()

◆ isA()

◆ IsExecutable()

◆ IsStripped()

◆ ParseHeader()

◆ ParseSymtab()

◆ ReadSectionData() [1/2]

◆ ReadSectionData() [2/2]

◆ SetLoadAddress()

◆ Terminate()

Member Data Documentation

◆ ID

◆ m_delegate_wp